Access Floors

Raised access floors help create the perfect indoor environment by maintaining high-quality clean air, improving personal comfort control, and responding to organizational and technological changes quickly and cost-effectively.

Data centers can benefit from access floors by providing a pre-engineered flexible solution to separate and organize different types of services while maintaining easy access to add and reconfigure equipment.

ConCore 800

Tate's ConCore® 800 raised access floor panel is intended for light-duty commercial applications with a total load requirement of 800 lbs or less and is engineered to meet Tate Standards per CISCA testing methods.

ConCore 1500

Tate's ConCore® 1500 raised access floor panel is intended for commercial applications with a total load requirement of 1000 lbs or less and is engineered to meet Tate Standards per CISCA testing methods.

ConCore 4000

Tate's ConCore® 4000 raised access floor panel is intended for commercial applications with a heavy total load requirement and is engineered to meet Tate Standards per CISCA testing methods.

ConCore 1000

Tate's ConCore® 1000 raised access floor panel is intended for commercial applications with a total load requirement of 1000 lbs or less and is engineered to meet Tate Standards per CISCA testing methods.

ConCore 2000

Tate's ConCore® 2000 raised access floor panel is intended for commercial applications with a total load requirement of 2000 lbs or less and is engineered to meet Tate Standards per CISCA testing methods.

  • • Panel weight: 35 kg/m² bare

    • All steel welded construction filled internally with a cementitious core material

    • Protected from corrosion by an epoxy paint finish

    • Class A flame spread rating

    • Non-combustible material

  • ICSF800 Panel-60cm

  • Tate ConCore 60cm ICSF Detail

  • File >

ConCore 1250

Tate's ConCore® 1250 raised access floor panel is intended for commercial applications with a total load requirement of 1250 lbs or less and is engineered to meet Tate Standards per CISCA testing methods.

ConCore 2500/3000

Tate's ConCore® 2500/3000 raised access floor panel is intended for commercial applications with a heavy total load requirement and is engineered to meet Tate Standards per CISCA testing methods.

Bolted Stringer

The Bolted Stringer system provides lateral resistance to heavy rolling loads & seismic loading.

  • • Panels can be gravity-held in understructure for fast removal and replacement

    • Stringers provide lateral resistance to heavy rolling loads and seismic loading

    • Seismic force-resistant pedestal are available to limit or eliminate the need for special bracing

    • Allows floors to be built over 24" high

    • Typical floor heights from 12"-36"; low finished floor heights (LFFH) available from 2.5"-4"

    • 2 inch deep stringers are available for additional loading needs

Cavity Floor Panels

A raised floor system designed for specific applications that require limited or no access to the underfloor area.

  • • 1500 lb design load

    • Panels are 60cm nominal size

    • Planned hatch panels allow underfloor access

    • Non-combustible

    • E-coated steel bottom sheet

    • Meets Tate Standards per CISCA testing methods

Seismic Understructure

Tate offers a wide range of understructure that can withstand a variety of seismic standards.

  • • Availble in multiple floor heights

    • Meets all CISCA standards

    • Can limit or eliminate the need for special bracing

Cornerlock

The Posilock understructure system provides self-engagement and positioning of the raised floor panels without the need for stringers.

  • • Provides self-engagement and positioning of floor panels

    • Self-capturing fastener remains within the panel and will not get lost

    • Steel pedestal head provides maximum strength

    • Pedestal nut provides anti-vibration and locking features

    • Seismic force-resistant pedestals are available that limit or eliminate the need for special bracing

    • Typical floor heights from 5”-24”; low finished floor heights (LFFH) available from 2.5"-4"

UFAD Bolted Stringer

A continuous gasket ensures an air-tight seal for underfloor air distribution.

  • • Clip On design provides self-engagement and positioning of floor panels

    • Continuous gasket ensures for air-tight seals for underfloor air distribution

    • Self-capturing fastener remains within the panel - will not get lost

    • Steel pedestal head provides maximum strength

    • Pedestal nut provides anti-vibration and locking features

    • Seismic force-resistant pedestals are available that limit or eliminate the need for special bracing

    • Typical floor heights from 15cm-40cm

UFAD Clip On

A gasket engages with a stringer & panel to form a underfloor air distribution air seal.

  • • Clip On design provides self-engagement and positioning of floor panels

    • Self-capturing fastener remains within the panel - will not get lost

    • Pedestal nut provides anti-vibration and locking features

    • Seismic force-resistant pedestals are available that limit or eliminate the need for special bracing

    • Typical floor heights from 15cm-40cm